TC SPORTLINE 89-94 NISSAN 240SX S13 4 LUG TO 5 LUG WHEEL HUB ADAPTER

4 Lug bolt pattern wheel hubs are usually for front wheel drive vehicles, therefore, many high end wheel companies only make stagger offset wheels in 5 lug bolt patterns. For 89-94 Nissan 240SX owners, in order to fit some of the wheels they have to buy special adapter-type spacers or locate some JDM conversion parts in order to change their bolt pattern to the 5 lug spec. Using spacer adapters will take away fender clearance so people will be forced to use smaller wheels than they desired. Used JDM parts that could cost a whole lot more and the condition of the parts might not be ideal. TC Sportline has developed a 5 lug hub assembly conversion kit that will allow S13 owners to covert their entire hub assembly from 4 lug to 5 lug bolt pattern. The conversion process is made much easier with the TCS hub kit and no major modifications are needed. The front hub assemblies also included high grade bearings for easy installation. The stock brake calipers can be retained after the conversion and because it is not the cheap spacer type conversion kit, S13 owners could use the biggest and widest wheels possible. It is also a safer option when building race/drift cars. This will enable 240SX owners to fit more variety of wheels in the desired offsets onto their vehicles. After the conversion, stock brake calipers can be retained or they could upgrade to a bigger brake kit. The kit comes with all four hub assembliesfor the front and rear axles. Specially designed hubs will also allow you to switch back to the 4-lug pattern by simply remove and reconfigure the wheel studs.